Many Steps Closer to Bathroom Launch Success

Since we haven't blogged in so long, this post has been ongoing for a month or two, it has made it hard to post because every time I have time to work on it there's more to add! We don't have a lot of pictures, blogging hasn't been top of mind and so when we were doing boring things like putting up insulation, the camera wasn't always at hand. Today I'm posting this thing, even though it isn't perfect. Our main computer is having issues, so I'm also doing this post on my super old laptop which has a faulty space bar and no photo editing software. These pictures are grainy at best. Let's call them "artsy." It's time to get you caught up on how our bathroom went from this...

To how it looks today...

We left off having our roof inspected and we've been given the go-ahead that our roof should be water-free in the future. That left us to continue making progress in the bathroom, and hopefully one day it will be usable.

Bathrooms have been a major part of life lately, with our renovation in the evenings and at work I was designing 7 bathrooms for one home. Definitely having lots of bathroomspiration, and the occasional bathroom related nightmare. I can't even imagine having a finished bathroom, but we're getting close!

Philip reinsulated our exterior wall, and it proved to be one of our best DIY projects to date, in my opinion. Everything went smoothly, it wasn't too difficult to figure out, and it made a big difference! We started out by removing the old insulation, they had actually spray foamed from the outside from what we could tell, but we didn't really know that going in so it was still good to get it freshened up. Also because the spray foam didn't extend all the way to the edges and had a lot of places for cold air to leak in. Next up we measured the width between studs and cut the insulation to size. After that it's just a matter of sliding the insulation easily into place. 

Philip also put up the vapor barrier, we weren't really sure how to do any of this but we spent the morning watching You Tube videos of people putting up insulation and vapor barriers, and then we just worked away! You Tube and Google are definitely great resources when you want to try and tackle something yourself, there are a lot of great tutorials out there that can help you get an idea of what you're doing.

Next up, the plumber came in and worked at installing our bathtub, as well as reconfiguring plumbing and improving some of the plumbing that was there before since it's all exposed anyway and we may as well do it right. We have a new stack, and a brand new bathtub. 

Our electrician came one evening and roughed in all of the wiring for 3 brand new GFCI's - in the old bathroom there was one plug, which only worked for 60s razors. He also hung our vent fan, which we ducted ourselves. We still have to drill the hole to vent it outside, but the ducting is all ready to go.

We purchased a light fixture last week online, crossing our fingers that it doesn't get back-ordered like crazy and that it looks okay in real life. It's a sleek fixture, that we hope will look great in the end. It's hard to choose these things when the room just looks like a gutted box! 

Finding flooring that met our criteria was a challenge. We didn't want tile because it's cold on the feet, hard to install yourself without some know-how, and would make a big ridge from our wood floor = stubbed toe central. We ended up with a vinyl tile from A&R Carpet Barn, they're big and rectangular and the installation sounded very user friendly. Basically each tile can be glued in place, and cut to fit with a utility knife. The tiles are a grey/white with a linear pattern. 

We've had to reframe the linen closet wall 2 times now, but hopefully we did it for the last time now. The main reason was to make the vent fan fit inside the wall, and we're actually kind of loving the wider 2 x 8 wall next to the shower giving it a more built in look. 

Once everything was framed, and electrical and plumbing were completed, we were ready for drywall. We called our friends to book it, right under the wire too as a couple days later one of them had a baby! Philip took the day off that they were coming so we could finish up with sound insulating and ducting, but a twist came when we realized the night before that the tub surround needed to go up before the drywall! 

After calling a number of friends/family who seemed handy to us, my aunt & uncle came over in the morning to give us a hand. It was terrifying drilling the holes through acrylic side walls, but it all went okay! Basically it was just a matter of putting silicone in a groove, putting each wall into the silicone, and drilling screws all along the top for extra support. 

As we were finishing up sound insulation our friends showed up and drywalled everything in an hour and a half. It looks awesome to have a bathroom with walls again!! First time since January!

Mudders & Tapers are almost done, one more coat to go, we delayed them a bit by going on vacation (we just got back from Minneapolis on Wednesday night). 

Next Steps:
- Choose paint color
- Prime
- Paint
- Install Flooring
- Casings & Trim
- Think of a Linen Closet Solution
- ....start our kitchen?